Brick Calculator

Estimate how many bricks you need for a wall from its net area, brick face size and mortar joints. Subtract openings and choose a separate allowance.

Project measurements

Example values are editable. Check dimensions and product labels before ordering.

%
USD

Price basis: per piece, or per box when entered. A blank optional quantity can be entered as 0.

Material estimate

Net area
7.432 m²
Net area
80 ft²
Nominal piece estimate
524.009 pieces
Whole purchase pieces
525 pieces

Calculation trace

7.4322432 m² ÷ 0.014183439374999999 m² per module × 1

Price basis, when entered: USD per piece.

Assumptions

  • Allowance explicitly selected: 0%.
  • Price excludes tax, delivery, labor and contingency.
  • Use actual product dimensions and manufacturer coverage.

Use a brick calculator to count a wall face from its area and the brick’s exposed dimensions. Include the mortar joint in the repeating module, deduct openings, add a selected cutting allowance, and round up. Check separate faces, returns and package sizes before turning a piece count into an order.

Estimate how many bricks you need for a wall from its net area, brick face size and mortar joints. Subtract openings and choose a separate allowance. Work from the measurements for your actual project before you check price. If another material belongs on the same order, work out its quantity separately. For companion estimates and measuring advice, see How to Read Concrete Yield and Material Coverage Labels, How to Calculate Square Footage of a Room, Paver Calculator, Concrete Bag Calculator. Read the CubicPilot calculation methodology for rounding, units and material assumptions.

How do you use this calculator?

  1. Select the shape if the tool offers a choice, then enter the primary measurements with their units.
  2. Enter the product’s actual label value when the form requests a yield, a package count, coverage or stock size.
  3. Choose an allowance explicitly. Read the measured and adjusted quantities before rounding any supplier order.

What should you enter?

Wall length
Primary length of the measured surface or run. Measure along the working face and keep the unit shown beside the field.
Wall height
Vertical dimension of the wall or face. Measure the actual height to the finish boundary and measure different heights separately.
Opening area
Area to leave uncovered. Measure each opening or exclusion, add the areas and deduct them once.
Actual brick face length
Actual visible face length of one piece. Measure in the orientation you will lay it.
Actual brick face height
Actual exposed second face dimension. Measure the face that will contribute to the surface, not material thickness.
Mortar joint
Clear joint width between adjacent pieces. Use the selected layout or manufacturer’s stated joint and avoid double-counting nominal spacing.
Waste / allowance
The percentage you choose to add for ordering. Use zero if the supplied quantity already contains the allowance. Record why you add any extra.
Material price per purchase unit (USD)
Optional price in USD per purchase unit shown by the tool. Check the actual quantity basis in your quote. Compare taxes, transport and labor separately.

How is the estimate calculated?

Net wall area = length × height minus openings. Brick module area = (actual face length + joint) × (actual face height + joint). Divide net wall area by module area, apply allowance and round up.

Net wall area = length × height minus openings. Brick module area = (actual face length + joint) × (actual face height + joint). Divide net wall area by module area, apply allowance and round up.

  • Convert dimensions to matching units before multiplying. Product-specific values come from your quote or label.

Which measurements does the brick calculator need?

Brick dimensions depend on orientation. For a face count, measure the length and height visible in the wall. A brick tipped on end shows a different face and covers a different area. Use the joint facing that layout, and keep distinct border or accent courses on separate lines.

How many bricks go into each wall face?

Small wall face

  • 6 × 4 ft wall, no openings
  • 8 × 2 in exposed brick, 0.375 in joint, 5% allowance
  1. 6 × 4 × 144 = 3,456 sq in.
  2. Module = 8.375 × 2.375 = 19.890625 sq in.
  3. 3,456 ÷ 19.890625 × 1.05 ≈ 182.438.

Round up to 183 bricks.

Check. 182 modules cover less than the adjusted 3,628.8 sq in.

Longer garden-wall face

  • 20 × 3 ft wall, no openings
  • Same example brick and joint, 10% allowance
  1. 20 × 3 × 144 = 8,640 sq in.
  2. 8,640 × 1.10 = 9,504 sq in.
  3. 9,504 ÷ 19.890625 ≈ 477.81.

Round up to 478 bricks for the face.

Check. 478 × 19.890625 = 9,507.71875 sq in.

How do mortar joints change bricks per square foot?

Illustrative pieces per square foot with ⅜ in joints
Exposed faceApproximate pieces per sq ft
8 × 2 in7.240
8 × 3 in5.095
12 × 3 in3.448

The exposed brick face and the mortar joint form a repeating module. Larger modules require fewer bricks for the same wall face. Enter the actual face dimensions in the orientation you will lay them; a generic bricks-per-square-foot rule can miscount a different product.

When should you allow extra bricks?

An area estimate is useful for comparing shapes, but it cannot create a row-by-row cutting schedule. A number just below the next pallet threshold still needs enough usable pieces for corners and offsets. Ask for pieces per pallet and whether partial pallets are sold. Check delivery limits and keep the estimated count separate from any minimum purchase.

Measure wall length and height, then subtract the area of genuine openings. The result estimates one wall face. Corners, multiple wythes, special bond patterns and shaped bricks require additional planning. This brick count does not calculate mortar bags or structural capacity.

Which wall features need a separate quantity?

Measure door and window openings in the same area unit as the wall, then deduct them once. Include any returns you will actually cover as their own face. A wall face estimate does not calculate mortar bags, masonry structure or a patio paving pattern.

What to check before ordering

  • Keep your measured estimate and purchase quantity on separate lines.
  • Compare the actual purchase units, handling and delivered prices.

Frequently asked questions

How do I calculate bricks per square foot?

Divide 144 by the brick-and-joint module area in square inches. Multiply by the net face area when you want a project count. Use the actual exposed face dimensions and the selected joint rather than assuming every brick sold by the same name has the same size.

Should I subtract windows and doors?

Subtract the openings that will contain no brick face. Measure both opening dimensions and keep them in the same unit before converting to area. If the opening has brick returns, calculate those separately, because they need material even though the opening itself is empty.

Why does the joint change the count?

Each repeating brick occupies the visible face plus the allotted joint. A different joint changes how many repeating modules fit in the same area. Confirm that the joint you enter corresponds to the brick pattern and the project specification.

How do I turn a count into pallets?

Use the exact pieces per pallet for the chosen SKU and ask whether the seller splits pallets. For full pallets, divide the rounded count by units per pallet and round up again. Check that the delivery location can accept the pallet weight.

How do I calculate how many bricks a wall needs?

Divide the net wall face area by the area of one brick-and-joint module. Apply the allowance you choose, then round up to whole bricks.

Does the brick calculator estimate mortar quantities?

No. Joint width changes the brick module and count, but mortar volume and mortar bag quantities are not outputs of this tool. Use the mortar manufacturer's coverage guidance separately.

Sources and editorial details

CubicPilot Editorial Team. Last content review .

Report a correction