How Do You Convert Cubic Feet to Cubic Yards?

To convert cubic feet to cubic yards, divide the cubic feet by 27. To go back, multiply cubic yards by 27. Convert each dimension to feet before calculating a volume. Keep the exact result through the estimate, then round only when you know the supplier’s sale increment.

If your sketch is in feet but the quote is in yards, put both quantities on the same order sheet. Start with the Topsoil Calculator for a soil footprint and depth. A volume conversion changes the unit without changing the quantity. It cannot tell you how deep to spread the material or what a given cubic yard weighs. The examples below cover bulk volume, known soil volumes and the reverse conversion. Each check gives you a way to catch a decimal error before you accept a quote.

How do you convert cubic feet to cubic yards?

  1. Write down the volume and its unit. Use the figure labeled cubic feet, not the figure reporting square feet.
  2. Divide the cubic feet by 27. Keep the unrounded answer until you know the order size.
  3. Multiply the answer by 27. It should give back the original volume.
  4. Ask for the sale increment. Round up to the first increment that covers the order target.

A cube that is 3 ft on every side holds 3 × 3 × 3 = 27 cu ft. Dividing by 3 converts a line from feet to yards. Dividing by 9 converts an area. A volume needs the third factor of 3.

What happens with 120 cubic feet of topsoil?

Known volume to bulk order

  • 120 cu ft of topsoil
  • Illustrative 0.25 cu yd sales increment
  1. 120 ÷ 27 = 4.444… cu yd.
  2. At that increment, 4.25 × 27 = 114.75 cu ft.
  3. The next increment at 4.50 cu yd gives 121.5 cu ft.

Quote 4.50 cu yd at this supplier.

Check. The rounded order supplies 1.5 cu ft above the measured 120.

Carry the measured volume in your notes even after you get a quote. You can call a second seller and compare a different increment without asking one seller to match the rounded amount quoted by another. If you add an allowance, apply it to the measured amount before repeating the seller rounding.

How do you convert cubic yards back to cubic feet?

Useful volume comparisons
Cubic yardsCubic feet
0.256.75
0.5013.50
127
254
3.5094.50
5135

For 3.5 cu yd, multiply 27 × 3.5 to get 94.5 cu ft. If you use bags marked 2 cu ft, divide 94.5 by 2 and round 47.25 up to 48 bags. At the label volume, 48 bags contain 96 cu ft. Compare 48 times the shelf price with a delivered bulk quote. Check package weight and unloading or trip costs. The mulch buying guide applies that comparison to landscape beds.

Which unit mix-ups change an order?

  • Feet versus inches. Four inches is one third of a foot. Using four feet makes the order twelve times too large.
  • Square versus cubic. Multiply area by a measured depth before converting to volume or the quote has no basis.
  • Yards versus tons. Confirm supplier density. Confusing mass and volume can produce the wrong truck quantity.
  • Early rounding. Separate measurements should be summed before sale rounding, or you may pay for more increments.
  • Loose versus installed volume. Ask whether the estimate describes the delivered pile or the placed layer. Ignoring the difference can leave an order short.

For a weight quote, see the bulk-density guide for gravel and rock.

How do you calculate volume from square feet and depth?

A 90 sq ft section at 6 in deep is 90 × 0.5 = 45 cu ft. Dividing by 27 gives about 1.667 cu yd. If the part you are filling is irregular, calculate each smaller section with its own measured depth. Do not apply the deepest spot uniformly unless it represents the section. The Gravel Driveway Calculator can estimate rectangular sections and use supplier density once you have the volume.

This workflow also avoids ordering the same area twice. Draw the boundaries with a pencil and note which shapes touch. Shared edges contribute no volume. Overlapping footprints do, so subtract any overlap or redraw the sections.

Which number should you give a supplier?

Give the material name and the adjusted amount in the sale unit, then ask the supplier to confirm the billed quantity. If the project needs 120 cu ft, telling a yard-based seller only “120” risks quoting the wrong order. Keep the unit on the same line as the number. If you later compare a bagged purchase, return to the same unrounded 120 cu ft. That kept measurement is the quantity you are trying to cover, even when each buying option delivers a different surplus.

When should you buy more than the converted amount?

An allowance represents a site decision. Ask whether uneven excavation, spillage or another measured difference changes the amount. If you can estimate the extra area or depth, write it down separately. Otherwise choose a reserve explicitly. Compare the adjusted amount with the seller’s minimum or increment. Transport and storage can change which order plan makes sense even when the arithmetic favors the larger package.

The landscaping material tools keep common material choices together. See CubicPilot’s unit and rounding methods if you are comparing results from different calculators or tracking a difference between measured and adjusted numbers.

What to check before ordering

  • Divide cubic feet by 27 and multiply cubic yards by 27.
  • Add unrounded volumes before applying an allowance.
  • Confirm actual sale increments and package volume.

Frequently asked questions

How many cubic feet are in a cubic yard?

A cubic yard contains exactly 27 cubic feet. Picture a cube with each side measuring 3 feet. Multiplying 3 × 3 × 3 gives 27. The relationship stays the same across materials, including concrete, rock, mulch and soil.

Can I convert square feet directly to cubic yards?

You need a depth as well as an area. Multiply square feet by depth in feet, then divide by 27. For example, a 6-inch layer is half a foot deep. The square footage alone leaves out one dimension of the volume.

Is a yard of gravel the same as a ton?

A cubic yard measures volume and a US short ton measures 2,000 pounds. Obtain the supplier’s bulk density for the selected gravel and condition to convert. Different products or moisture levels can give different weights for an equal delivery volume.

What if the order form accepts only one decimal place?

Ask the seller whether that is its sale increment. If so, move up to the first available value that covers your target. Keep your full measured and adjusted amounts separately so you can compare another seller or convert to bags later.

Can I add volumes quoted in different units?

Convert them to the same unit first. You can multiply cubic yards by 27 or divide cubic feet by 27. Add the resulting numbers only for the same material where that total will guide a single quote. Keep a separate line for each material.

Sources and editorial details

CubicPilot Editorial Team. Last content review .

Report a correction