Topsoil Calculator

Estimate how much topsoil you need from the covered area and soil depth. Calculate volume first; add supplier density only when you need a weight estimate.

Project measurements

Example values are editable. Check dimensions and product labels before ordering.

%
USD
Additional rectangular sections

Add non-overlapping rooms or pads. Exclusions and allowance are applied once to the combined quantity.

Price basis: per cubic yard, or per bag when entered. A blank optional quantity can be entered as 0.

Material estimate

Net area
18.581 m²
Net area
200 ft²
Measured volume
1.416 m³
Measured volume
50 ft³
Measured volume
1.852 yd³
Volume with allowance
1.416 m³
Volume with allowance
1.852 yd³

Calculation trace

1.4158423296 m³ × 1 = 1.4158423296 m³

Price basis, when entered: USD per yd³.

Assumptions

  • Allowance explicitly selected: 0%.
  • Price excludes tax, delivery, labor and contingency.
  • Use actual product dimensions and manufacturer coverage.

The topsoil calculator estimates how much new soil fills a measured area to a depth you enter. Multiply area by depth and convert to cubic yards for bulk ordering. Add a settling allowance only if you intend one, and enter supplier bulk density if you also need an approximate delivery weight.

Estimate how much topsoil you need from the covered area and soil depth. Calculate volume first; add supplier density only when you need a weight estimate. Work from the measurements for your actual project before you check price. If another material belongs on the same order, work out its quantity separately. For companion estimates and measuring advice, see Cubic Feet to Cubic Yards: Material Volume Conversion, How Much Mulch Do I Need? Cubic Yards and Bags, Mulch Calculator, Landscape Rock Calculator. Read the CubicPilot calculation methodology for rounding, units and material assumptions.

How do you use this calculator?

  1. Select the shape if the tool offers a choice, then enter the primary measurements with their units.
  2. Enter the product’s actual label value when the form requests a yield, a package count, coverage or stock size.
  3. Choose an allowance explicitly. Read the measured and adjusted quantities before rounding any supplier order.

What should you enter?

Length
Primary length of the measured surface or run. Measure along the working face and keep the unit shown beside the field.
Width
Second footprint dimension, or full diameter when the circular option uses this field. Measure the concrete or material footprint itself, excluding form lumber and edging that will not be filled.
Added depth
Thickness or depth of the measured material. Measure only the layer being estimated and confirm the unit before entering.
Supplier density (optional)
Optional bulk density in the selected weight per volume unit. Ask the seller for the selected material in the condition relevant to the estimate.
Waste / allowance
The percentage you choose to add for ordering. Use zero if the supplied quantity already contains the allowance. Record why you add any extra.
Material price per purchase unit (USD)
Optional price in USD per purchase unit shown by the tool. Check the actual quantity basis in your quote. Compare taxes, transport and labor separately.

How is the estimate calculated?

Added soil volume = area × depth. Apply the selected settling allowance. Optional weight = adjusted volume × supplier density. Add each extra rectangular section’s area × its depth to the base volume before applying the allowance.

Added soil volume = area × depth. Apply the selected settling allowance. Optional weight = adjusted volume × supplier density.

  • Convert dimensions to matching units before multiplying. Product-specific values come from your quote or label.

How do you measure an area for the topsoil calculator?

For a raised bed, measure the inside footprint and the gap between the existing surface and the desired fill level. On a lawn, map each shallow patch independently. The whole lawn area only belongs in the estimate if you are actually treating the entire area to the entered depth.

How much topsoil do two different fills need?

Rectangular raised bed

  • 4 × 8 ft inside, 12 in of new material
  • Example 10% allowance
  1. 4 × 8 = 32 sq ft.
  2. 12 ÷ 12 = 1 ft.
  3. 32 × 1 = 32 cu ft.
  4. 32 × 1.10 = 35.2 cu ft.
  5. 35.2 ÷ 27 ≈ 1.304 cu yd.

Quote at least 35.2 cu ft, rounded to the seller’s actual unit.

Check. 35.2 ÷ 1.10 = 32 cu ft.

Lawn topsoil layer

  • 1,000 sq ft, 2 in of measured fill
  • Zero allowance
  1. 2 ÷ 12 = ⅙ ft.
  2. 1,000 × ⅙ = 166⅔ cu ft.
  3. 166⅔ ÷ 27 ≈ 6.173 cu yd.

The geometry calls for about 6.173 cu yd before seller rounding.

Check. 166⅔ ÷ 1,000 × 12 = 2 in.

How much area does a cubic yard of topsoil cover?

Volume for a 100 sq ft footprint
Added depthCubic feet
1 in8⅓
2 in16⅔
4 in33⅓

Measure the length and width of each covered section and the intended depth of the added soil. Keep the calculation separate from existing ground volume. Different depths need separate sections; square footage alone cannot determine a topsoil order.

Should you compare bagged soil with a delivery quote?

Ask the seller about minimum volume, unloading access and the condition used for any quoted weight. Wet material can weigh more than the dry example on a bag. For bulky orders, use measured volume to size the layer and supplier weight to plan transport independently. Price the rounded purchase, including delivery or trip costs.

Loose delivered soil can settle after placement. The allowance is your explicit purchasing adjustment, not a universal settlement factor. Bulk density also depends on the material and condition. Confirm the topsoil specification, ordering unit and any settlement adjustment with the supplier.

How do uneven grade and settling affect the estimate?

Keep container potting mix, fill and topsoil as separate buying lines when they are different products. Choose a depth for your project from the plan or appropriate growing guidance. An example depth is a calculation input. The estimate cannot determine soil composition or guarantee how much a specific product settles.

What to check before ordering

  • Keep your measured estimate and purchase quantity on separate lines.
  • Compare the actual purchase units, handling and delivered prices.

Frequently asked questions

Can I use the outside width of a raised bed?

Measure the inside width and length where the soil will sit. Outside dimensions can include boards or edging. Measure the height you want to add above the existing surface, then calculate that fill volume separately from any existing soil or other material.

What if a lawn needs soil only in patches?

Sketch the treated patches and measure each one. Separate areas that require different depths before adding their volumes. Multiplying the whole lawn by the deepest patch would overstate the order and would not tell you where the extra material actually belongs.

Does a settling allowance also change weight?

The optional weight estimates the adjusted volume times the supplied bulk density. Check the density and condition with your supplier. If your allowance is already included in a supplied order volume, avoid applying it again before calculating the approximate transport weight.

Should I order topsoil in bags or by the yard?

Compare the volume needed with package coverage or a bulk quote. For bags, divide cubic feet by labeled cubic feet per bag and round up. For bulk, ask about increments and minimums. Compare delivered totals and how you will move and unload the material.

How do I calculate cubic yards of topsoil?

Multiply area in square feet by depth in feet, then divide by 27. If depth is in inches, divide it by 12 before multiplying.

Can I use this as a soil weight calculator?

Yes, as an estimate when you supply a compatible bulk density. Soil volume by itself does not establish weight, and a delivery scale may give a different actual mass.

Sources and editorial details

CubicPilot Editorial Team. Last content review .

Report a correction