How to Measure for a Concrete Slab Before You Order

To measure for a concrete slab, take the inside length and width of the forms in feet. Divide the planned concrete thickness in inches by 12. Multiply those three dimensions, then divide by 27 for cubic yards. For an irregular slab, add the separate section volumes before applying an allowance and rounding your order.

Start with the finished shape. A shed pad and a patio with the same footprint can need different amounts of concrete if the patio has a thickened edge. Enter your measurements in the Concrete Volume Calculator, which lets you add rectangular sections with their own thicknesses. Keep a sketch beside your estimate so every part of the pour appears once. The examples below take a 10 × 12 ft shed pad from measurement to an order and show how to count a separate wing on an L-shaped patio.

How do you measure for a concrete slab inside the forms?

  1. Sketch the footprint. Measure from inside face to inside face, or check the planned dimensions on site before ordering.
  2. Measure slab length and width in feet. Mark any gap the concrete will not fill.
  3. Record slab thickness in inches and measure thicker areas separately. Keep subbase depth on another line.
  4. Multiply length by width for square feet. Multiply by thickness in inches divided by 12 for cubic feet. Add the volumes, then divide by 27 for cubic yards.

How do you calculate an irregular slab shape?

Draw a line across the L-shaped patio to create two rectangles that share an edge. They must have no overlap. A 14 × 10 ft rectangle and a separate 6 × 6 ft wing cover 140 + 36 = 176 sq ft. At 4 inches thick, they hold 176 × 4 ÷ 12 = 58⅔ cu ft. Divide by 27 to get about 2.173 cu yd before allowance.

A straight diagonal corner can be measured as a triangle. Multiply its base by its perpendicular height, then divide by two for square feet. Multiply by concrete thickness in feet and add the result to the rest of the pour. Keep the triangle calculation separate from the rectangles you enter in the calculator.

What changes if the plan shows a thickened edge?

If your slab total already covers the whole footprint at 4 inches, add only the extra depth of a rectangular edge band that reaches 8 inches. The difference is 8 − 4 = 4 inches. Multiply the measured band area by 4 ÷ 12 ft to find the extra volume. Count shared corners once.

For a tapered edge, use the cross-section dimensions from the plan and ask for clarification if the shape is unclear. For a footing included in the same job, the concrete and masonry calculators can help you choose the right volume estimate.

How much concrete does a 10 × 12 ft shed pad need?

Shed pad with a 4-inch slab and an example 10% allowance

  • Inside dimensions: 10 ft × 12 ft.
  • Thickness: 4 inches throughout.
  • Bag label yield: 0.60 cu ft per 80 lb bag in this example.
  • Supplier order increment: 0.25 cu yd in this example.
  1. Find the footprint: 10 × 12 = 120 sq ft.
  2. Convert thickness: 4 ÷ 12 = ⅓ ft.
  3. Find the measured volume: 120 × ⅓ = 40 cu ft. Divide by 27 for about 1.481 cu yd.
  4. Add the allowance: 40 × 0.10 = 4 cu ft. The order target is 40 + 4 = 44 cu ft, or about 1.630 cu yd.
  5. Divide 44 by the labeled yield of 0.60 to get 73⅓ bags. Round up to 74 bags.
  6. At the example supplier, 1.50 cu yd is too little. Round up to the next available amount, 1.75 cu yd.

Buy 74 bags at the example yield or order 1.75 cu yd at the example supplier’s increment.

Check. 40 cu ft ÷ 120 sq ft = ⅓ ft, or 4 inches. At the example yield, 73 bags produce 43.8 cu ft and 74 produce 44.4 cu ft. A 1.75 cu yd delivery supplies 47.25 cu ft.

Use the Concrete Bag Calculator with the adjusted volume and the mixed yield printed on the bag. Set its allowance to zero if you already included an allowance in the slab estimate.

How much does thickness change concrete slab volume?

Measured volume before any order allowance
FootprintThicknessCubic feetCubic yards
8 × 10 ft pad4 in26.6670.988
10 × 12 ft shed pad4 in40.0001.481
10 × 12 ft shed pad6 in60.0002.222
176 sq ft L-shaped patio4 in58.6672.173

Adding 2 inches to the same shed pad adds 20 cu ft, or about 0.741 cu yd. Use the thickness from your plan and carry unrounded volume into the order. See the cubic feet to cubic yards conversion guide.

Which measurement mistakes cost you money?

  • Outside form measurements inflate the footprint. Measure the inside space the concrete will fill.
  • Using inches as feet multiplies the depth by twelve. Write the unit beside each dimension.
  • Adding subbase depth to slab thickness inflates the order. Measure the layers separately.
  • Overlapping rectangles count the same concrete twice. Mark their shared edge.
  • Adding the full edge depth double-counts concrete above the extra depth.
  • Rounding each section to a sale increment can inflate the order. Add the volumes first.

For the base quantity, use the guide to estimating a separate gravel layer.

When should you order extra or ask a pro?

If the forms moved or the base has a deeper patch, remeasure before adding an allowance. Calculate any measurable extra depth separately. Use an allowance for small changes you cannot measure well, such as minor low spots or material left in handling equipment. See the CubicPilot calculation methodology for how the estimate separates measured volume from order volume.

Ask the supplier about partial orders and short-load fees. Check the bag yield for dry mix. For uncertain thicknesses, tapers or structural footings, get the dimensions confirmed before ordering. Replace the example allowance and sale increments with your own.

What to check before ordering

  • Measure inside the forms and record concrete thickness separately from the gravel subbase.
  • Split the footprint into shapes that do not overlap and count extra edge depth once.
  • Apply an allowance to the unrounded total, then round up once using the actual bag yield or supplier increment.

Questions about measuring and ordering concrete

Do I measure the inside or outside of concrete forms?

Measure between the inside faces of the forms. That is the space the concrete will fill. If you need an estimate before the forms go in, use the planned inside dimensions and check them before placing an order, especially if the layout changed.

Does gravel subbase depth count toward concrete slab volume?

Measure the gravel and concrete as separate layers. If a plan shows 4 inches of concrete above 4 inches of gravel, use only 4 inches in the concrete calculation. Use the gravel layer’s area and depth for its own estimate and confirm how the supplier sells it.

How many cubic yards of concrete do I need for a 10 by 12 slab?

A 10 × 12 ft slab at a uniform 4 inches needs about 1.481 cu yd before allowance. Calculate 10 × 12 × 4 ÷ 12 = 40 cu ft, then divide by 27. Adjust for the planned thickness and any measured thickened areas before applying an allowance.

Can I measure a sloped slab by averaging its depth?

You can average the end depths of a rectangular section if thickness changes evenly from one end to the other. If the top and base run parallel and thickness stays constant, use the constant thickness. If the base is uneven, measure smaller sections or confirm the cross section with the designer.

Should I round up before or after adding a concrete allowance?

Add the allowance before rounding the purchase quantity. Keep the unrounded volume for each section until you add them up. After applying the allowance, round up to the next whole bag or available supplier increment. Rounding each section first can add more material than you intended.

How many bags of concrete make a cubic yard?

A cubic yard takes about 45 bags at a label yield of 0.60 cu ft per 80 lb bag. At 0.45 cu ft per 60 lb bag, it takes about 60 bags. At 0.30 cu ft per 40 lb bag, it takes about 90. Check your exact mix’s yield and round up for your actual order.

Is bagged concrete or ready-mix cheaper for a slab?

The cheaper option depends on local prices and how you can move the material. Multiply bag count by price per bag. Multiply the order’s cubic yards by the quoted price per yard and add delivery and any short-load fee. Compare those totals, plus any mixing equipment or transport you need for bags.

Sources and editorial details

CubicPilot Editorial Team. Last content review .

Report a correction